Everything we build
Four lines, nine series, eleven models. Every specification below is taken from the factory datasheet for that model — the same sheet a quotation is written against.
Label cutting
3 series · 5 models
ZD350 series
Up to 350 mm wide and 150 sheets a pass, with a CCD camera re-registering each sheet against the print. Three builds differ in motor, top speed and ports.
- Cutting width
- 350 mm
- Cut speed
- 1,600 mm/s
- Auto feed
- 150 sheets
ZD500 Plus SE
The ZD350's 350 mm cut, with a 1,000-sheet feeder and two heads for crease and cut in one pass.
- Cutting width
- 350 mm
- Max moving speed
- 1,600 mm/s
- Auto feed
- 1,000 sheets
ZD680 Plus SE
600 mm cutting width and 1,200 sheets: the widest sheet line before you need a flatbed table.
- Cutting width
- 600 mm
- Max moving speed
- 1,600 mm/s
- Auto feed
- 1,200 sheets
Roll-to-roll
2 series · 2 models
Roll Max 350
Three servo motors and a waste rewind: this one slits, strips and rewinds in a single pass.
- Material width
- 350 mm
- Cutting width
- 330 mm
- Cut speed
- 1,200 mm/s
Flatbed
2 series · 2 models
F3550 PRO
A 420 × 480 mm vacuum table for short runs of board and carton that do not justify a die.
- Cut area
- 420 × 480 mm
- Max moving speed
- 1,200 mm/s
- Vacuum pump
- 1,500 W
FCR6090
600 × 900 mm table with a roll feeder behind it, so a printed roll is sheeted and cut in one pass.
- Cutting size
- 600 × 900 mm
- Material size
- 630 × 1,200 mm
- Cut speed
- 1,200 mm/s
Vinyl cutters
2 series · 2 models
S series
A 390 mm plotter for card, PVC, leather and reflective film — materials a knife table handles badly.
- Cutting width
- 390 mm
- Cutting force
- 800 g
- Cut speed
- 700 mm/s
SV series
1,240 mm cutting width on a floor stand at 2,000 g: signage and stencils wider than a metre.
- Cutting width
- 1,240 mm
- Cutting force
- 2,000 g
- Max moving speed
- 700 mm/s
Which one fits the job
Send the media, the cut width and the throughput you need. If two series overlap on the numbers we will say so and quote both, rather than push the larger machine.