Flatbed
F3550 PRO A3+ flatbed cutting table
A 420 × 480 mm table held by a 1,500 W vacuum pump, with two heads that cut, crease and kiss-cut. Built for short runs of board, carton and printed sheets that do not justify a die.
420 × 480 mmCut area
1,200 mm/sMax moving speed
1,500 WVacuum pump
F3550 PROFit
What it takes, what it does not
Cuts
- Sheet to 420 × 480 mm and 1 mm / 400 gsm, held down by a 1,500 W vacuum pump.
- Two heads cutting, creasing and kiss-cutting in one pass.
- Short runs and one-offs: the job changes with the file, not with a die.
Does not — and where that job goes
- A sheet larger than 420 × 480 mm goes to the FCR6090 at 600 × 900 mm.
- Sheet-fed only — the roll feeder is on the FCR6090, not here.
Specification
Datasheet figures
Factory datasheet values, not measured — the sheet is available on request.
Specification
- Maximum cut size
- 420 × 480 mm
- Net / gross weight
- 80 kg / 120 kg
- Working method
- 1,500 W vacuum pump, strong adsorption
- Max moving speed
- 1,200 mm/s
- Paper thickness
- No more than 1 mm / 400 gsm
- Interface
- U-disk / USB / WiFi / WLAN
- Positioning
- HD camera automatic positioning
- Cutting head quantity
- 2 heads
- Cutting tool mold
- Crease + Cut, Kiss Cut + Die Cut
- Max force
- 2,000 g
- Cutting accuracy
- ±0.1 mm
- Repeat & positioning accuracy
- ±0.082 mm
- Power
- <100 W
- Working environment
- 5–35 °C
- OS / software
- Windows XP 7/8/10 · CorelDRAW / AI · Camera Cut plug-in
- Product size
- 915 × 675 × 300 mm
- Package size
- 1,420 × 740 × 470 mm
Gallery
In detail
Range