Roll-to-roll
Roll Max 350 roll label die-cutter
Unwind, slit, waste-strip and rewind in one pass, driven by three separate DC servo motors. A 7-inch touch panel runs it, and a QR code on the printed roll selects the cutting file without an operator typing a job name.
350 mmMaterial width
330 mmCutting width
1,200 mm/sCut speed
Roll Max 350Fit
What it takes, what it does not
Cuts
- Slitting printed roll label from a 10 mm minimum width, waste stripped and rewound.
- Unwind 350 mm, rewind 300 mm, waste 300 mm, on three separate DC servo motors.
- 0.01 mm registration, with a QR code on the roll selecting the job file.
Does not — and where that job goes
- One head, one tool holder: a single blade angle at a time, 45° or 60°.
- Contour-cut shapes come off the VH330 5-SF instead.
Specification
Datasheet figures
Factory datasheet values, not measured — the sheet is available on request.
Specification
- Unwinding motor
- DC servo motor
- Rewinding motor
- DC servo motor
- Waste rewinding motor
- DC servo motor
- Control panel
- 7-inch touchscreen
- Cutting heads
- 1
- Tool holders
- 1
- Tool types
- Cutting blade, pen
- Blade angles
- 45°, 60°
- Operating mode
- Single-head mode
- Max material width
- 350 mm
- Max cutting width
- 330 mm
- Max cutting height
- 400 mm
- Max cutting speed
- 1,200 mm/s
- Max cutting force
- 2,000 g
- Repeat accuracy
- 0.01 mm
- Cutting accuracy
- 0.01 mm
- Max unwinding roll diameter
- 350 mm
- Max rewinding roll diameter
- 300 mm
- Max waste roll diameter
- 300 mm
- Min slitting width
- 10 mm
- Connectivity
- WiFi, USB, Ethernet, USB drive
- Edge detection sensor
- Camera
- Registration points
- L-corners, dots
- Applicable materials
- Self-adhesive labels
- Power
- <150 W
- Input
- 100–240 VAC, 50/60 Hz
- Operating temperature
- 5–35 °C
- Operating humidity
- 35–75 % RH, non-condensing
- Machine size
- 1,300 × 1,100 × 1,450 mm
- Net weight
- 165 kg
Gallery
In detail
Range