Roll-to-roll
VH330 5-SF roll-to-roll label cutter
A roll goes on the back and comes off the front cut, stripped and rewound. Four pinch rollers and a servo feed hold registration across the web, so a printed roll can be contour-cut without a die.
490 mmMedia width
330 mmCutting width
1,200 mm/sCut speed
VH330 5-SFFit
What it takes, what it does not
Cuts
- Contour cutting of printed roll label, sticker, sign and heat-transfer stock.
- Media 150–330 mm on the roll, cut through 350 g at 1,200 mm/s.
- Lettering down to about 3–5 mm, held to ±0.082 mm repeat.
Does not — and where that job goes
- It cuts shapes, not strips — slitting and waste rewind are the Roll Max 350's job.
- Media wider than 330 mm goes to the SV1350 plotter or a sheet line.
Specification
Datasheet figures
Factory datasheet values, not measured — the sheet is available on request.
Specification
- Max media width
- 490 mm
- Max cutting width
- 330 mm
- Motor
- Servo
- Max cutting thickness
- 350 g cut through
- Maximum roll size
- 330 mm
- Minimum roll size
- 150 mm
- Cutting speed
- 1,200 mm/s
- Max diameter of roll
- 150 mm
- Cutting force
- 2,000 g
- Accuracy
- ±0.1 mm
- Power
- <100 W
- Interface
- U-disk / WiFi (optional) / USB cable
- Cutting size of small letters
- About 3–5 mm
- Repeat / positioning precision
- ±0.082 mm
- Working environment
- 5–35 °C
- Usage
- Roll label cutting · sticker · sign-making · heat transfer
- OS / software
- Windows XP 7/8/10 · CorelDRAW / Signmaster
- Gross weight
- 120 kg
- Packing size
- 1,330 × 980 × 1,250 mm
Gallery
In detail
Range